Method 1: using the reset button on the back of the device. Use the paperclip to press down the reset button on the back of the router. You can find the button behind a small opening. Wait about 5 seconds for the power LED to light up. Now you can release the button. TP-Link Tether provides the easiest way to access and manage your TP-Link Router/ xDSL Router/ Range Extender with your mobile devices. From quick setup to parental controls, Tether provides a simple, intuitive user interface to see your device status, online client devices and their privileges. - Setup SSID, password and Internet or VDSL/ADSL Router resets itself to factory default. 2022-05-25 04:23:41. Model: Archer AX1500. Hardware Version: V1. Firmware Version: Archer AX1500 (US)_V1_220401. I was travelling last week when I noticed remotely that my home network was down. I could not connect remotely so when I got home I checked the modem and router and the router had reset itself Resetting a TP-Link router can be done using either the reset button or the configuration page. Method 1: Using the reset button involves pressing it for 5 seconds until the power LED lights up, then releasing it. Method 2: Using the configuration page requires logging into the router’s settings, navigating to “Advanced Settings,” then Press and hold the reset pinhole/button with a small object such as a pin for approximately 10 seconds while the router is on. Release the reset button and wait for the device to reboot. The reset pinhole/button can be found using the following images as a guide: 1. Make certain that the router is powered on before it restarts completely. 2. Step 1. Connect your smartphone to the Wi-Fi of the router. Then open the Tether APP and login the router. Please tap the management icon at the bottom right corner, and you will see a red point in the System area which indicates there is new firmware for the router. 6. Click System Log or Administration-Event Log on the navigation bar. This button will open your router’s system log on a new page. 7. Click the Clear Log button. This button will clear your router's system log history. If you’re prompted to confirm your action in a pop-up, click OK or Yes. tqbmMeg.

reset tp link router